On household and similar fixed electrical installations product standards for electrical accessories shell version of the principles and procedures for
Posted: 2010-01-27 Source: Visits: 1146
 
The relevant certification business:

    Household and similar fixed electrical installations Boxes and enclosures for electrical accessories for installation of four new countries, the relevant standard (hereinafter referred to as the new standard) has released the table below:

No.
 Standard Name
 Standard
 Release Date
 Implementation date
 Deadline for version
 
1
 Household and similar fixed electrical installations Boxes and enclosures for electrical accessories for installation Part 1: General requirements
 GB17466.1-2008
 December 30, 2008
 February 1, 2010
 February 1, 2011
 
2
 Household and similar fixed electrical installations Boxes and enclosures for electrical accessories for installation Part 21: for the suspension of the installation box and the special requirements of housing
 GB17466.21-2008
 December 30, 2008
 February 1, 2010
 February 1, 2011
 
3
 Household and similar fixed electrical installations Boxes and enclosures for electrical accessories for installation Part 23: Surface mount boxes and the special requirements of housing
 GB17466.23-2008
 December 30, 2008
 February 1, 2010
 February 1, 2011
 
4
 Household and similar fixed electrical installations Boxes and enclosures for electrical accessories for installation Part 24: house protective devices and similar power consuming devices in the case of special requirements
 GB17466.24-2008
 December 30, 2008
 February 1, 2010
 February 1, 2011
 

    To ensure the smooth progress of the standard version for the continuing validity of the results and certification, according to the State Commission on Certification and Accreditation Administration (CNCA) 2010 Bulletin No. 2 "on the household and similar fixed electrical installations Electrical Enclosures Compulsory Product Certification implementation of new standards-related requirements of the notice "requirement, now the standard version of the principles and procedures published as follows:

    First, the standard version of the principle of

    1, since the date of announcement until full implementation of the new standard, the applicant may voluntarily choose according to new standards or GB17466-1998 (hereinafter referred to as version of the standard) for authentication (if you choose to apply for certification in accordance with the version of the standard should allow sufficient time to ensure the implementation of the new standard before the official certified certificates); since February 1, 2010, the new standard should be used to implement authentication.

    2, has been obtained for the compulsory certification of products, version of the standard certificate holders after the release of the new standard, and should be checked the next track, before the new standard conversion applications for certification and acceptance criteria corresponding to different projects based on laboratory implementation of the testing, after passing the new standard certificate renewal. Version of the standard certificate of conversion work will be February 1, 2011 to complete overdue to complete the conversion of the certificate, CQC will be suspended; May 1, 2011 certificate of conversion work not yet completed, will be withdrawn version of the standard certificate.

    3, the time for the certified products have the reasons for the application can be combined into a single unit without the merger, additional testing in accordance with a unit treatment.

    Second, the standard version of the program

    1, the standard version of the application

    1) The basic steps are as follows:

    Step 1: Applicant to use the unit user name and password CQC website (www.cqc.com.cn);

    Step 2: Click the screen on the left of the "complete certification application";

    Step 3: Click on the "China Compulsory Certification (CCC)" section under the "complete CCC application for change";

    Step 4: Select the "protection of 02 circuit switch and electrical device or connection" category, then select product small class "0206 household and similar fixed electrical installations Enclosures";

    Step 5: Fill to apply for a precise standard version of the CCC certificate number and the corresponding test report number;

    Step 6: Fill in the application for certification of basic information: the applicant, the manufacturer, production plant name and address, product name, model specifications, etc.;

    Step 7: Fill in the application for certification for additional information, please select the Item 12: Certification is based on national standards, technical regulations or certification implementation rules have changed. Content complete change to the installation box for the suspension and shell products, for example, change the project: standard version, before the change: GB17466-1998, after the change: GB17466.1-2008, GB17466.21-2008.

    2) Notes on application

    (1) The standard version of this test and issue the required test report, can not be batch application, so please do not step 5, the applicant will fill out more than the certificate number into the space;

    (2) For ODM Certificate:

    a. the holder must promptly communicate the initial certificate holder to ensure that the original timely application for initial certification standard version, ODM apply for a certificate in the initial version of the certificate within one month after the certified version for application.

    b. Certificate of completion of the initial standard version before the new certificate will not be accepted based on the ODM applications. ODM has made an application for certification yet, suspended, pending completion of the initial certificate after the standard version change, modify, supplement the certification information, and submit the samples meet the new standards to the testing agency to complete testing, re-issued report The ODM application can continue processing.

    c. ODM certificate in the standard version to be submitted for agreement, the agreement must meet the "OEM ODM agreement on the requirements of notice" (see the CQC website notice bulletin board, November 28, 2007 release);

    d. Additional requirements related to ODM, press the "Implementation Rules for Compulsory Certification ODM model involved in the Supplementary Provisions" (CNCA Announcement No. 30 of 2009) requested the Executive;

    (3) the holder in the standard version of the same application, you can add other changes to the project, such as increased product specifications, etc., but please note that in step 6,7 complete, select the content.

    2, standard version of your case

    In principle, each CCC certificate for the application units, each certificate to fill in a version for application.