The process of submitting the Federal Motor Vehicle Safety Standard (FMVSS) compliance application to DOT consists of the following steps:

1. The manufacturer appoints a DOT applicant who has the US Permanent Residence Right, which will participate in all the contact with the DOT during the compliance application.

2, to the DOT submitted agent designated documents, agent approval documents, the Federal Motor Vehicle Safety Standard (FMVSS) compliance application.

3, randomly selected samples, sent to the DOT approved laboratory laboratory testing.

4, the laboratory to the DOT OVSC to submit a specific product testing program, approved after the start of testing.

5, the test in case of problems, the laboratory will apply to the manufacturer to submit a preliminary assessment report and compliance survey report, put forward product improvement advice.

6, the manufacturer to improve the product, re-send samples to be re-tested until the final through the test.

7, OVSC and DOT approved manufacturer's compliance application, allowing the product to legally enter the US market.

8, OVSC will annually inspect the motor vehicle and parts products, review the validity of the DOT certification held by the manufacturer, and ensure that the product meets the minimum performance and marking requirements specified by the FMVSS standard.

The above is the motor vehicle and parts products DOT certification and laboratory testing of the general operation process, according to the type of product and specifications, there will be application process on the details of the differences. We welcome the manufacturer to consult our company DOT project engineer.