Third, the general provisions

       1, Australia controlled EMC / EMI architecture and the European CE-Marking EMC roughly the same, are collected from the way I certified: according to product standards and through the test, signed a self-declaration can be. The difference is that the declaration must be signed by the importer or supplier or manufacturer in Australia; the Australian government still requires each Australian local supplier or importer to sign in to its executive unit ACA.

       2, where electronic and electrical products are in the tube range, similar to the provisions of the European Union CE.

       3, Supplier application C-tick log, do not need to hold the test report, in principle, the test and C-tick login can be parallel.

       4, in line with the provisions of EMC products must be posted before the sale of fresh pestle label: C-tick mark & Supplier ID; Supplier ID marked there are four, one can choose:
     A) Supplier Code Number issued by the ACA;
     B) Australian Company Number (ACN);
     C) Registered Name and Address of Supplier;
     D) Australian Registered Trademark.
     The label can be scaled or reduced in proportion to the principle of the naked eye to see clearly; but the Supplier ID font is not less than 3mm. Mark the best position with the same type of label, if the space is not enough, can be considered on the manual, warranty or box on.

      5. If a product is the same as EMC & SAFETY, the mark can apply for RCM. RCM is a voluntary trademark owned by New Zealand and Australia and can be marketed by applying for certification to a country. The registrant must be a manufacturer or importer or agent in New Zealand, according to AS / NZS 4417.1 and AS / NZS 4417.3 Sign in to Standards Australia and ACA.

      6, once the ACA request to view the TCF, the agent must be served within 10 working days ACA.